Bespoke RAS 1 Reflector & FFEH Infrared Heating Element

Creating Better Outdoor Spaces with Bespoke Infrared Heating

OutHounds was founded with a straightforward ambition: to make it easier for people to enjoy outdoor spaces all year round.

The company designs, supplies and manages bespoke outdoor spaces for commercial applications, working with specialist contractors to deliver permanent outdoor structures. The resulting outdoor environments are designed to feel more like an extension of the building than a temporary addition.

For hospitality businesses, this approach can help create usable outdoor areas throughout the year, giving business greater confidence that outdoor tables and event spaces can remain functional beyond the warmer months.

The Project

The project centred on an events space on the sixth floor of a recently renovated building in Leeds, covering approximately 200 square metres.

The requirement was to integrate infrared heating into the space. However, Tony North, Manager at OutHounds, had become frustrated with some of the options available on the market.

Traditional outdoor heaters could be visually intrusive, while some infrared solutions produced a noticeable glow that could affect the ambience of an otherwise carefully designed space. For OutHounds, the heater needed to provide effective warmth without looking like an afterthought.

After researching ceramic infrared heating elements online, Tony discovered Ceramicx. He was particularly interested in the fact that Ceramicx manufactures its own heating elements rather than simply distributing products, as well as the company's ability to support the design and develop a solution around the requirements of the project.

Sixth floor of a recently renovated building in Leeds, UK

The Design

The original concept involved mounting the reflector directly onto a steel beam. During the design process, however, it became clear that a surface-mounted heater would be visually prominent and could detract from the clean lines of the structure.

The option of partially recessing the reflector into the steel section was proposed. This introduced a number of engineering considerations. The reflector needed to be adapted for the recessed installation, while managing heat within the steel structure and protecting nearby components from heat.

The standard RAS 1 reflector was adapted to work within the bespoke steel frame. A closed-box configuration was also considered, incorporating fixing tabs welded to the sides of the assembly.

The final assembly combined a Ceramicx FFEH 1000W, 230V infrared heating element with a bespoke RAS 1 reflector and stainless-steel bracket arrangement.

Bespoke RAS 1 reflector and FFEH element after assembly

Assembly specification

Heating element:

FFEH 1000W, 230V ceramic infrared element

Reflector

RAS 1, manufactured from aluminium clad steel

Bracket:

Stainless steel 304

Electrical connections:

Terminal block and earth terminal

Leads:

300 mm fibreglass leads

Installation:

Heating element pre-fitted into the reflector assembly

The scope of supply also evolved during the project. Instead of simply providing individual components, Ceramicx supplied the required cables and fitted elements to develop a complete, application-specific infrared heating assembly.

This simplified integration into the customer's steelwork and reduced the amount of preparation required during installation.

Bespoke RAS 1 reflector and stainless-steel bracket arrangement

Heating Designed into the Architecture

For OutHounds, the key objective was not simply to add heating to the structure. The aim was to design the infrared heating into the architecture itself.

By recessing the reflector into the steel section, the heater became part of the overall structure rather than a separate component attached to it. This created a cleaner, more discreet appearance while retaining the required infrared heating performance.

That approach is particularly important for OutHounds, where the appearance of an outdoor space is fundamental to the overall design.

As Tony explains:

“Everyone is very happy with the heaters. Integrated into the steel section, they look much better than standard infrared heaters.”

A recent event in the space with heaters in use

From Individual Components to a Complete Solution

What began as an enquiry for an infrared heating element developed into a wider bespoke infrared heating project.

For Tony, the process also highlighted the possibilities of working directly with an infrared heating manufacturer on a bespoke heating solution.

“Working on the infrared side of the project opened my eyes to what can be done.”

The project has also prompted OutHounds to explore what could be possible in future applications, including other heater designs and improved control options.

Looking Ahead

For Ceramicx, the project demonstrates what is possible when heating elements, reflectors and assemblies are developed around a customer's specific application rather than supplied solely as off-the-shelf components.

By working collaboratively from the heating element through to the finished assembly, Ceramicx was able to help OutHounds integrate infrared heating directly into the architecture of the space — creating a solution that is designed to perform without compromising the overall aesthetic.

 

If you are developing a commercial, hospitality or architectural project that requires bespoke infrared heating, Ceramicx can work with you to develop a heating element, reflector or complete assembly around your application requirements.