These heaters are filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2250°C (4082°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
Available Wattage: 1500 - 2000W / 240V
Size: 10 x 473mm
Standard Termination: R7s
Available Wattage: 1500 – 2000W
Size: 10 x 473mm
Short wave emitters filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2250°C (4082°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
Standard Products: R7s termination and 10 mm diameter glass.
Please note: other configurations available on request.
Model | Wattage | Voltage | Max. Coil Temp | Overall Length | Heated Length |
|---|---|---|---|---|---|
QHL | 1500W | 240V | 1905°C (3461°F) | 473mm | 415mm |
QHL | 1750W | 240V | 2205°C (4001°F) | 473mm | 415mm |
QHL | 2000W | 240V | 2250°C (4082°F) | 473mm | 415mm |
Infrared carbon fibre heating system enabling composite pre-forming processes to run 3–4 times faster.
All product data, with drawings and technical information.
