These short wave emitters are filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2410°C (4370°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
Available Wattage: 1000W / 240V
Size: 10 x 277mm
Standard Termination: R7s
Available: 1000W / 240V
Size: 10 x 277 mm
Short wave emitters filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2410°C (4370°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
Standard Products: R7s termination and 10 mm diameter glass.
Please note: other configurations available on request.
Model | Wattage | Voltage | Max. Coil Temp | Overall Length | Heated Length |
|---|---|---|---|---|---|
QHM | 1000W | 240V | 2410°C (4370°F) | 277mm | 225mm |
%20qsg_002_s.webp)
Custom infrared pre-heat and curing systems that improve heating speed, consistency, and efficiency.
All product data, with drawings and technical information.
